China Pvc Lighting Panel Equipment Manufacturers, Suppliers, Factory

PE Luggage Edge Srip Equipment includes single screw compressor - machine head mold - vacuum shaping warehouse - traction tractor - winding machine or cutting machine 1. The main machine adopts hard tooth surface stop machine transmission, the screw barrel is made of high-strength quenched alloy steel (38CrMoALA) or high-strength quenched alloy steel (9Cr18MoV), and the main machine drive adopts AC variable frequency controller, no oil stains, low noise; temperature control The device adopts an intelligent temperature control meter, and the temperature control accuracy reaches ±1℃; 2. The main body of the stainless steel cooling pool is made of imported SUS304 material; the water tank frame adopts a threaded lift device, which can be adjusted in three dimensions up, down, left and right, making the operation very convenient; it is also equipped with a stainless steel water storage tank, so that the cooling water can be recycled without splashing on the ground; 3. The traction machine has variable frequency controller and the traction speed is steplessly adjustable. 4. The winding machine adopts frequency converter to adjust the speed to achieve the ideal production speed.

Root Control Making Machine PS Root Controller Forming Machine root controldevice is mainly in accordance with the working principle of hot pressing equipment design. Root control equipment can also produce water spraying sheets 1. Root Control Making Machine is mainly in accordance with the working principle of hot pressing equipment design, process is: sheet —— feeding —— heating —— pressing —— pressure —— molding —— cutting steps, appearance neat and practical, plate processing all processing center, ensure the accuracy of all hole size, column and pin appearance are hard chromium quenching treatment, ensure the sliding and wear resistance, machine system edited into manual and automatic two parts, in manual case all action can be single operation. 2: The feed motor is driven by a servo motor with a power of 2 kW. 3: feeding reducer motor 0.55KW and 1:10 special reducer, to ensure the stability of feeding speed! 4: Ceramic heating block: new ceramic heating block, heating fast and low power consumption, the temperature can be adjusted freely, according to the thickness of different materials. 5: Other mechanical parts are produced and processed by our company. Automatic control system adopts: Delta PLC control, 6: The machine adopts hydraulic balanced distribution design, the overall balance is better, to solve the situation of the high and low in the production to prolong the use time of the mold.

Seed Tray Vacuum Forming Machine technical parameter Specification width of used sheet: 300~320mm, thickness: 0.8~2mm. Forming area (maximum): 400*600 mm, working efficiency of 15~20 times / minute. Power used: three-phase four-wire 380 volts, maximum power 25KW Hydraulic pressure: 100T External size (mm) length, width and height) 3600mm*980mm*1500mm

As the professional manufacture, EASTSTAR would like to provide you PVC Sheet Extrusion. And EASTSTAR will offer you the best after-sale service and timely delivery.

Geogrid Extrusion Equipment is used to produce geocells. The first step of this product is to produce sheets, and then the sheets are cut online, and then the plastic sheets are connected through ultrasonic welding and other methods

Plant Transplant Root Control Board Equipment is mainly in accordance with the working principle of hot pressing equipment design. Root control equipment can also produce water spraying sheets 1. PET Root Plant Root Protection Equipment is mainly in accordance with the working principle of hot pressing equipment design, process is: sheet —— feeding —— heating —— pressing —— pressure —— molding —— cutting steps, appearance neat and practical, plate processing all processing center, ensure the accuracy of all hole size, column and pin appearance are hard chromium quenching treatment, ensure the sliding and wear resistance, machine system edited into manual and automatic two parts, in manual case all action can be single operation. 2: The feed motor is driven by a servo motor with a power of 2 kW. 3: feeding reducer motor 0.55KW and 1:10 special reducer, to ensure the stability of feeding speed! 4: Ceramic heating block: new ceramic heating block, heating fast and low power consumption, the temperature can be adjusted freely, according to the thickness of different materials. 5: Other mechanical parts are produced and processed by our company. Automatic control system adopts: Delta PLC control, 6: The machine adopts hydraulic balanced distribution design, the overall balance is better, to solve the situation of the high and low in the production to prolong the use time of the mold.