China Parking Lot Geocell Extrusion Machine Manufacturers, Suppliers, Factory

Seedling Box Plug Tray equipment technical parameter Specification width of used sheet: 300~320mm, thickness: 0.8~2mm. Forming area (maximum): 400*600 mm, working efficiency of 15~20 times / minute. Power used: three-phase four-wire 380 volts, maximum power 25KW Hydraulic pressure: 100T External size (mm) length, width and height) 3600mm*980mm*1500mm

PA Sheet Production Line The production line consists of: single-screw extruder, three-roller calender, cooling bracket with automatic trimming device, rubber roller traction machine, and winding machine. Products of different specifications can be produced according to different requirements of customers. Sheets with different surfaces can be produced with smooth, orange peel, and matte surfaces.

Defects of The PP/PC lamp case production line : 1. The PP/PC lamp case production line suitable for the collision of rigid pipes and special-shaped materials; the specific configuration depends on different origins Product design plan! 2. The PP/PC lamp case production line Applicable raw materials: PC, PMMA, ABS, rigid PVC, PP, PE and other pellets 3. The PP/PC lamp case production line Applicable pipe diameter range: round pipes, semicircles, and special-shaped products within OD120mm. 4. The PP/PC lamp case production line Suitable for brazing and two-color through co-extrusion extruder and mold. 5. The PP/PC lamp case production line Different products can adopt water-cooling, cold-top, air-cooling and other processes

PP Heat Insulation Equipment

The most important part of Soft Pvc Sheet Extruder Machine Turtle Pattern Machine is the three-roller forming machine, which has two smooth rollers and a tortoise shell roller in the middle.The processing procedures of the tortoise shell roller include: rough turning, dynamic balancing, fine turning, grinding, electroplating, engraving, frosting, and fine mirror grinding. The time for engraving the roller is relatively long, so the delivery cycle of the whole equipment is relatively long. Manufacturers who need to process and customize tortoise shell equipment must place orders in advance.

PP PE Coated Pipe system machine PP PE Coated Pipe system machine is mainly used for coating the surface of various metal pipes with a layer of plastic. Stainless steel pipe diameter: 1-200mm can be customized according to customer requirements; Surface coating materials for PP coated pipe equipment: PE, PP, PVC, PA, etc; Coating speed: 0.5-50 meters per minute.     Production process of PP coated pipe equipment: Stainless steel pipes on the wire rack or material rack are first preheated by a heating device, then wrapped in plastic by the main machine coating mold, cooled by a circulating water tank, pulled by a traction machine to the wire storage rack, and then automatically cut to a fixed length.   Due to different processing techniques for various profiles, the required equipment configuration and equipment are also different.